Cascade Clamp

Cascade Clamps - Founded in Portland, Oregon in 1943, the Cascade Manufacturing Company began as a small machine store hiring only four individuals. Total sales for that initial year totaled $60,000. The very first recorded sales revenues involved the assembly and machining of stainless-steel pipe fittings, valves and various components. Throughout 5 years of operation, the company had expanded to forty staff and their annual sales volume had increased to $330,000. These days, Cascade is among the top worldwide producers within the material handling trade.

Design and manufacturing of the company's very first hydraulic cylinder allowed this new company to aggressively engage in new business possibilities. Throughout the last sixty years, the business of material handling has grown into a very sophisticated field with Cascade proudly playing a part in its progress. Cascade currently continues to develop as the best supplier of forklift attachments and numerous related items. The company feels confident in their skill to continue to lead the way in the business by understanding customer's needs in the future and remaining competitive in the international market.

In the 1950's, Cascade started designing, making and selling hydraulic attachments. Manufacturing was finished in 1956 on a brand new office to be able to accommodate all office and plant operations in Portland, Oregon at the company's current center of operations. After fifteen years of business, total workers reached a hundred and eighty employees and sales had reached almost two million three hundred thousand dollars.

A second production plant was built in 1959 in Springfield, Ohio. 1960 marked Cascade's initial move into the international world of the material handling industry when the business established interest in England, Australia, and the Netherlands.

In 1964, the business changed its name to the Cascade Corporation. After that in the year 1965, the company went public with a preliminary offering of 200,000 shares of common stock. Since then the company has expanded its manufacturing facilities within the continental USA to the areas Warner Robins Georgia to go along with its already existing plants in Portland, Oregon and Springfield, Ohio. Cascade merchandise are fabricated globally thanks to numerous subsidiary operations. In the year 1944, a brand new facility was accomplished in Almere, the Netherlands which is Cascade's European command center. This facility is designed to be the essential customer support centre.

Continuing to grow, Cascade expanded their product offering further in 1996 and the year 1997 with the remarkable acquisition of 5 companies, together with the international best in blades, the Kenhar Corporation.

Click to Download the pdf

Forklift Parts

Parts for Diesel Boom Lift

Diesel Boom Lift Parts - Also known as aerial work platforms, boom lifts comprise a platform or bucket mechanism which is attached to a hydraulic hoisting system. This kind of aerial work platform is usually found mounted on a flat-back pickup van, likewise referred to as a "Self Drive." Boom lifts are likewise obtainable on a self-moving platform, or on...

More

---

Clark Forklift Attachment

Clark Forklift Attachments - At present, there are at least 350,000 Clark lift trucks performing worldwide, and in excess of 250,000 in commission in North America alone. With five major lines across the world, Clark is proud to be one of the most expansive organizations in the industry. Heavy duty vehicles ranging from 1,500lb to 18,000lb capacities, duel fuel, gasoline,...

More

---

Forklift Starter

Forklift Starters - A starter motors today is normally a permanent-magnet composition or a series-parallel wound direct current electrical motor together with a starter solenoid installed on it. When current from the starting battery is applied to the solenoid, basically through a key-operated switch, the solenoid engages a lever which pushes out the drive pinion which is situated on the...

More

---

Concrete Hopper

Concrete Hopper - The self-dumping hopper accessory could automatically start to both dump and release when the bumper release contacts the side of a dumpster. After unloading is finished, the hopper is able to return to original locked and upright position. This piece of equipment also comes together with a cable that allows operation from the seat of the forklift...

More

---

Remanufactured Forklift Part

Remanufactured Forklift Parts - Lift trucks are really expensive pieces of machinery. A five thousand pound new electric model can cost between $18,000 to $25,000 and several thousands of dollars more will be needed for a battery and a battery charger. The same internal combustion forklift of the same lift capacity would cost a little less and the diesel models...

More

---

Walkie Stacker Part

Walkie Stacker Parts - Pallet stackers are a kind of pallet jack that can be used to stack, transfer and haul cargo positioned on a pallet that are far too heavy for physical lifting. Generally these mechanisms are employed to load and unload cargo from trucks and to transport pallets from one location to another within a warehouse of storeroom...

More

---

Fuel Regulator for Forklift

Forklift Fuel Regulators - Where automatic control is concerned, a regulator is a tool which functions by maintaining a specific characteristic. It carries out the activity of managing or maintaining a range of values inside a machine. The measurable property of a tool is closely managed by an advanced set value or particular circumstances. The measurable property could even be...

More

---

Lifting Hook

Lifting Hooks - A lifting hook is a tool designed for carrying and grabbing things in conjunction with a crane or hoist. The lifting hook is usually outfitted along with a safety latch. The latch prevents the disengagement of the chain, lifting wire rope sling, or rope to which the load is attached.

More

---